Cue sensorCUE-W User Manual download pdf (Page 8)

5. Programming

The standard command for reading out the data from sensorCUE-W is:

RemoteVariableGet (reference as Word, paneladdress As Byte) as Word

The reference allows to identify which measured value should be read while the paneladdress

identifies which sensorCUE unit is to answer.

The following reference values are supported:

• Reference = 0 sensorCUE firmware version

• Reference = 1 temperature value

• Reference = 2 lighting level value

Reference = 0 sensorCUE-W firmware version

Response value is in range 0 - 65535

Example: Fw = RemoteVariableGet (0, 34)

This command has assigned the firmware version number of sensorCUE-W (with the address 34) to

the Fw variable.

Reference = 1 temperature value

The temperature is measured with a 12-bit resolution sensor. It covers the measuring range from

+50 °C to -20 °C

The temperature value is encoded into a 16-bit response value according to the following rules:

Response value bit weight

BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

S S S S S 2

-1

-2

-3

-4

S means sign.

S=0 for positive and S=1 for negative values.

User Manual sensorCUE-W

www.cuesystem.com

Page 8 of 14

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Cue sensorCUE-W User Manual Page 8